Specifications
PB-503C Portable Analog & Digital Design Workstation | |
Power | 3-wire AC line input (117V, 60 Hz typical) with power-on indicator. Both Models are available in 220-240VAC@50Hz |
Fixed DC output | +5V@1.0A, ripple <5mV. |
Variable DC output | +1.3 V to +15V@0.5A, ripple <5mV. |
Variable DC output | -1.3V to -15V @ 0.5A, ripple <5mV. |
Frequency Range | 0.1 Hz to 100 kHz in six ranges. |
Output voltage | 0 to ?10V (20Vp-p). |
Output Impedance | 600 ohms (except TTL). |
Output current | 10mA maximum, short circuit protected. |
Output waveforms | sine, square, triangle, TTL. |
Sine wave | distortion <3% (10Hz to 100kHz). |
TTL pulse | rise and fall time <25 nS. drive to 10 TTL loads |
Square wave | rise and fall time <1.5?S |
Logic Indicators | 8 LED's, active high, 1.4 volt (nominal) threshold, inputs protected to ?20 volts. |
Debounced Push-Button (Pulsers) | Two pushbutton-operated, open-collector output pulsers, each with one normally-open, one normally closed output. Each output can sink up to 250 mA. |
Potentiometers | One 1 K ohm, one 10 K ohm, all leads available and uncommitted. |
BNC Connectors | Two BNC connectors, pin available and uncommitted, shell connected to ground. |
Switches | Two SPDT slide switches, all leads available and uncommitted. 8-pole DIP switch: one side of all eight switches connected and switchable to +5V or ground, other side of all eight switches separate, available, and uncommitted |
Speaker | 0.25W, 8 ohms |
Breadboarding Area | Three UBS-100 sockets with 840 tie-points each for a total of 2520 uncommitted tie-points. Two QT-59B Bus strips internally connected to power and ground. Fifty tie-points each for +5V, +V,=15 V and ground. |
Enclosure | High impact molded case. |
Weight | 7 lbs, 13 oz. |
Overall Dimensions | with case: 14in H x 19in W x 7in D |
Part Number | 104-5031 |
Portable Analog/Digital Trainer (BAT-ENT-8)
- Brands Bangladesh Automation Technologies
- Product Model: BAT-ENT-8
- Stock status: Out Of Stock
-
Price : 20,000.00 /=
- Ex Tax: Price : 20,000.00 /=