Description of this Product:

In the industrial automation in the sector, there is a need for variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase to control the speed of the motor. The Variable Frequency Inverter, 7.5/kW, 440V, 3-Phase change the speed of a motor by changing some parameters. These parameters are frequency and supplied voltage to the used motor. By changing the frequency and supply voltage of a motor, the Variable Frequency Inverter, 7.5/11kW, 440v, 3-Phase can run the motor slowly or speedy.

Consider, power supplied to an AC The motor is 50 Hz, then the motor will run at its rated speed. If the frequency increases by about more than 50 Hz, the motor will run faster than its rated speed. If the frequency reduces to 50 Hz, the motor will run slower than at its rated speed.

The Variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase is not much expensive to use in industry or factory. This Variable Frequency Inverter is a high-frequency variable drive. There is a communication port, that is RS485 enabled. The Variable Frequency Inverter consists of the Input/Output module, where are rated current, input voltage, input frequency, output voltage, output frequency, and overload capacity.

Control Panel:

The Variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase has a control feature. This control panel consists of control mode, communication port, speed regulation, starting torque, speed control accuracy, frequency precision, frequency resolution, torque boost, interior PID controller, automatic energy save running, automatic voltage regulation, and automatic current limiting, etc.

Specification for this Product:

Parameter	Value
Rated Current	25A
Input Voltage	3-Phase 440V
Input Frequency	50Hz/60Hz
Output Voltage	3 phase AC 0~input voltage
Output Frequency	0.00~400.00Hz
Capacity	7.5kW/11kW
Over Load Capacity	150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control Mode	V/F control; Sensorless vector control
Communication Port	RS485
Speed Regulation	1:100
Start Torque	150% at 1 Hz
Speed Control Accuracy	≤±0.5% of rating synchronous speed
Frequency Precision	Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2%
Frequency Resolution	Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz
Torque Boost	Manual torque boost 0.1%~30.0%
Interior PID Controller	Be compatible to make a closed-loop system
Automatic Energy Save	Optimize V/F curve automatically based on the load to realize the power save running
Automatic Voltage Regulation (AVR)	Can keep constant output
Automatic Current Limiting	Limit running current automatically to avoid frequent over-current which will cause a trip
Enclosure Rating	IP 20
Temperature	–10℃~ +40℃; VFD will be derated if ambient temperature exceeds 40℃; each rise 1℃, the debate will be 5%
Humidity	5%-95%, without condensation
Altitude	≤1000m; VFD will be derated if above 1000m
Oscillation	Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store Environment	–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Item Condition: New

Warranty: 12 Months

Payment & Shipping Terms:

Minimum Order Quantity:	1 /PCS

Packaging Details:	100% original new
Delivery Time:	IN STOCK; 1-2 weeks for ordering
Payment Terms:	MasterCard, Bkash
Supply Ability:	50 PCS

Find out more information about these products, click here

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Variable Frequency Inverter, 7.5kw, 440V, 3-Phase

Brands Unimat
Product Model: FA200-7.5G-T2

Stock status: Out Of Stock

34500.00
Price : 34,500.00 /=
Ex Tax: Price : 34,500.00 /=

Qty

1 reviews / Write a review

Description of this Product:

Control Panel:

Specification for this Product:

Payment & Shipping Terms: