Introduction to MITSUBISHI PLC CPU FX1S-10MR-ES/UL
Mitsubishi is one of the best PLC brands all over the world for its never compromising and outstanding features. In the technology sector, it becomes a renowned name for its never-ending good will. It has powerful control features in a small package. It is not usually, useful for the bigger projects rather it is used and ideally suited for the smaller application or projects input and output application where the future applications will not be required.
The manufacture series of Mitsubishi PLC CPU( FX1S-10MR-ES/UL) is FX1S. It is 60mm wide, the number of input and output is 10 where the output type is a relay and the output number is basically 4 relays. The programming language that is used in this product is the ladder logic. The operating temperature is usually staying in between 0 to +55 degrees. The number of communication ports that are used here is one. It is a DIN rail mounting type. The programming interface here used is via computer. The voltage category stays in between 100-240 Vac. The program capacity is usually 2000 steps. The communication port type here used is RS422.
This FX1S-10MR-ES/UL offers powerful control specifications in an ultra-small package. As it is a small package, it is not ideally suited for the big projects, rather it is very useful for the small projects where future expansion will nor needed.
It has 10, 14, 20, and 30 fixed input/ output size, five hundred and twelve auxiliary relays, sixty-four timers, thirty-two counters, 256 data registers where no battery backup is required.
This FX1S offers a range of processing speed, number of complex applied instructions which has a proven development spanning more than ten years. It has 24Vdc inputs which can be configured as sink or source. It has 27 basic network communication instruction by using alternative RS-232, RS-422, and RS-485 modules with a sixty kHz high-speed counter. It has a DIN rain or surface mount with strong password security. It has a built-in real time clock and Runs/Stop system, relays, and transport output system.
Transistor output rated from 5v to 30Vdc and high up to 0.5A per point maximum. GK developer or FX software type program is used here. It has a choice of AC or DC password or models.
Being a tiny and small range programming logic controller, this Mitsubishi FX1S-10MR-ES /UL is often seen in the industrial manufacturer control section. In this product, there has six analogs inputs, four analogs outputs, and also many, mainly six digital outputs. It is basically equipped with a panel mount. It is basically providing a quick result in a small application. In this product, they're basically used to transmit data through a maintained communication serially. As a result, it can be used in the compact data system and is not available to be applied to the local. It has a continuous scanning function, and any software change during the worktime will not change any program and hinders any work.
It is available in projuktiponno at tk 10,500 with a lasting assured
mitsubishi plc cpu fx1s 10mr es ul
- Brands Mitsubishi
- Product Model: FX1S-10MR-ES/UL
- Stock status: Out Of Stock
-
Price : 10,537.75 /=
- Ex Tax: Price : 10,537.75 /=