Product Details:
Digital Expansion Blocks
These are available in 8 or 16 input or output point sizes.
They attach directly to the right-hand end of the Base Unit or Expansion Unit
(see Digital Expansion Units below) which also provides them with power. Input
blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP
sensors, and output blocks are available with a relay or transistor outputs. The
number of blocks that may be added depends on a number of factors. However, as
a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of
FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in
turn can be further expanded by adding more Expansion Blocks. With the FX2N,
the number of I/O that can be added depends on the size of the Base Unit. For 16
and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24
outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base
and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs
and 24 outputs can be added. For full configuration details and limitations,
please refer to the FX1N and FX2N Hardware Manuals.
Mitsubishi Digital Expansion Blocks
The Mitsubishi digital expansion blocks attach directly to
the right-hand end of the base unit or expansion unit (see Digital Expansion
Units below), which also provides them with power. This module has 16 relay
type outputs. Input blocks are opto-isolated. The number of blocks that may be
added depends on the size of the base unit.
Features and Benefits
• LEDs for indicating input and output status
• 24VDC sink or source selectable to suit NPN or PNP sensors
• Output blocks are available with relay or transistor outputs
• Compact design
• Vertically terminal blocks with a cable guide to the upper and lower side
Applications
• Industrial automation
• Robotics
• Automobile industry
Certifications
• IP10 rated
• ANSI/ESD S20.20:2014
• BSEN 61340-5-1:2007
Additional Modules for Mitsubishi FX1S, FX1N & FX2N
PLC's
Products in this range are for use with FX1S, FX1N and FX2N
PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and
87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
Mitsubishi PLC module fx2n 16eyr
- Brands Mitsubishi
- Product Model: FX2N-16EYR
- Stock status: Out Of Stock
-
Price : 4,500.00 /=
- Ex Tax: Price : 4,500.00 /=